Ductless Mini-Split Heat Pump
You have a saved application!
Product Requirements
Ductless heat pump must be 17 SEER/16 SEER2 and 9.5 HSPF/8.1 HSPF2 or higher to qualify (equipment must be AHRI rated).
Ductless heat pump must replace existing natural gas wall furnace (AFUE 67% or less) and window AC (SEER 17 or less and EER 11 or less)
Cooling capacity of the installed equipment must be less than 65,000 btu/hr
Existing equipment must be removed and disposed rather than refurbished and sold.
Gas lines must be capped and photo provided
For cases where existing equipment was a wall furnace and a window ac: see attached screenshot from the measure checklist
If the base/existing equipment was a wall furnace only: the equipment must be fully decommissioned and disposed of.
The following is acceptable for validation:
- Contractor/Implementer
Customer Attestation:
Confirms the attestation states the method of disposal for the base unit
If the base/existing equipment was a window AC and wall furnace: the equipment must fully decommissioned and disposed of. Also, the refrigerant must be handled in accordance with all state and local regulations, including but not limited to EPA regulations (40 CFR Part 82, Subpart F) under Section 608 of the Clear Air Act.
The following is acceptable for validation:
- Contractor/Implementer/ Customer Attestation: Confirms the attestation states the method of disposal and refrigerant handling for the base unit
Customer Eligibility
Must be an SCE Customer
Must be located on the DAC/Low-income map (California Climate Investments Priority Populations Mapping Tool 4.0) and meet legend requirements:
- Blue: Low-Income Community
- Yellow: Disadvantaged Community: CES
- Green: Disadvantaged Community: CES, Low-Income Community
Dwelling must be single family or multi-family with four units per foundation or less.
- Independently metered
- In-unit appliances (not shared) -New construction is not -eligible.
Incentive amount cannot exceed purchase price.
Use an SCE HPP Participating Contractor (Trade Ally) to perform upgrades and submit rebate application(s) on the homeowner's behalf.
Must NOT be in any state assistance programs
Other Requirements
Application must be submitted with 90 days of installation date.
Homes are eligible for one incentive per existing unit
All installed measures must follow current ETRM version guidelines in additional to SCE guidelines to qualify for rebates
Product Requirements
Ductless heat pump must be 17 SEER/16 SEER2 and 9.5 HSPF/8.1 HSPF2 or higher to qualify (equipment must be AHRI rated).
Ductless heat pump must replace existing natural gas wall furnace (AFUE 67% or less) and window AC (SEER 17 or less and EER 11 or less)
Cooling capacity of the installed equipment must be less than 65,000 btu/hr
Existing equipment must be removed and disposed rather than refurbished and sold.
Gas lines must be capped and photo provided
For cases where existing equipment was a wall furnace and a window ac: see attached screenshot from the measure checklist
If the base/existing equipment was a wall furnace only: the equipment must be fully decommissioned and disposed of.
The following is acceptable for validation:
- Contractor/Implementer
Customer Attestation:
Confirms the attestation states the method of disposal for the base unit
If the base/existing equipment was a window AC and wall furnace: the equipment must fully decommissioned and disposed of. Also, the refrigerant must be handled in accordance with all state and local regulations, including but not limited to EPA regulations (40 CFR Part 82, Subpart F) under Section 608 of the Clear Air Act.
The following is acceptable for validation:
- Contractor/Implementer/ Customer Attestation: Confirms the attestation states the method of disposal and refrigerant handling for the base unit
Customer Eligibility
Must be an SCE Customer
Must be located on the DAC/Low-income map (California Climate Investments Priority Populations Mapping Tool 4.0) and meet legend requirements:
- Blue: Low-Income Community
- Yellow: Disadvantaged Community: CES
- Green: Disadvantaged Community: CES, Low-Income Community
Dwelling must be single family or multi-family with four units per foundation or less.
- Independently metered
- In-unit appliances (not shared) -New construction is not -eligible.
Incentive amount cannot exceed purchase price.
Use an SCE HPP Participating Contractor (Trade Ally) to perform upgrades and submit rebate application(s) on the homeowner's behalf.
Must NOT be in any state assistance programs
Other Requirements
Application must be submitted with 90 days of installation date.
Homes are eligible for one incentive per existing unit
All installed measures must follow current ETRM version guidelines in additional to SCE guidelines to qualify for rebates